|
   |
 |
 |
PRODUCT RANGE
|
|
 |
|
|
 |
NSW - 152 B.O.D. INCUBATOR "CALTAN" (LowTemperature
Incubator) Temperature is controlled by Electronic
Digital Temperature Controller Cum-indicator from 5°C to 50°C,
variation plus minus 1°C. Inside air circulating system is provided
by F.H motor with fan which keeps uniform temperature throughout the
chamber. It is useful in the biological laboratory fctor the preservation
of vaccines, such as insulin and liver extracts a* 15°C for
serological and complement fixation tests at low temperatures,
forenzymatic digestion process and in the physical or chemical
laboratory for general low temperatures usf fitted with CFC free Eco
friendly compressor. Double-walled inside anodized aluminium
and outside mild steel sheet painted in epox\ powder coating to work on
220/230 volts A.C. Available in 4, 6.1,10, 12, and 15 cu. ft capacities
Deluxe & Super Deluxe (Electronic Temp. Control).Electronic digital
read out timings and interior illumination can also be supplied with
unbreakable acrylic transparent door inside. Double-walled inside anodized aluminium and outside mild steel sheet painted in epox\ powder coating to work on 220/230 volts A.C. Available in 4, 6.1,10, 12, and 15 cu. ft capacities Deluxe & Super Deluxe(Electronic Temp. Control). Electronic digital readout time and interior illumination can also be supplied with unbreakable acrylic transparent door inside. "DELUXE AUTOMATIC "
Electronic temperature controller
with its accessories have been fixed to cut off automatically either
beating or cooling system when the ambient temp, increase or decrease
from these" temp, of the chamber.
|
|||||||||||||||
|
 |
NSW - 152 B.O.D. INCUBATOR "CALTAN" (Super
Deluxe Automatic)
(Other Specification as above but fitted with
Electronic Digital Temp. Controller-cum-Indicator with sensitivity of
plus minus 0.5 °C.with electronic digital voltmeter.
The following optional arrangements can be made in each model of B.O.D. Incubator.... 1. Inside chamber and shelves can be made of stainless steel 304 QLTY instead of anodized aluminium at an extra cost. 2. B.O.D. Incubator with interior illumination with 3 number fluorescent tube of 60 cm. length placed vertically along the back wall. Separate on/off switch for tubes and minimum temperature can be obtained from 10°C. to 50°C. when all the tubes are on with 0-24 hour timer for regulated cyclic. THIS ARRANGEMENT CANNOT BE MADE IN 4 CU.FT. B.O.D. INCUBATOR. 3. B.O.D. Incubator for incubation in C0: air mixtures could be provided with an inlet nozzel on the side of control panel providing a means for monitoring CO, or air CO, mixtures similar nozzel is provided for monitoring CO, concentration. 4. Humidity control from 55% to 95% by humidistat can be provided by natural mist in each B.O.D Incubator. |
|||||||||||||||
|
 |
NSW - 256 ORBITAL SHAKING INCUBATOR-CUM-B.O.D.
INCUBATOR
Having temperature range 5°C
to 60°C ± to.5°C. Inside chamber made
of stainless steel outside mild steel with epoxy powder coating paint.
Temperature shall be controlled by electronic digital
indicator-cum-controller. With standard shaker platform to accommodate
16 flasks of 500ml capacity & electronic RPM meter with 7 days
programme timer. Complete with 4 number of 60 cm fluorescent tubes on
the top of inside chamber with voltage stabilizer. SIZE OF SHAKING INCUBATOR : 660W X 5330 X 533H mm. Additional shaker platform to accommodate. Other Capacity of Flasks to cost extra |
|
|
Copyright
© Narang Scientific Works Private Limited, All Rights Reserved
